Coroner's Concerns (AI summary)
The detachment of a wheelchair seat cushion after only 9 months raised concerns about the robustness of the attachment method, and a lack of assessment of the vehicle restraint system's fit contributed to the deceased being thrown into the footwell during transport.
View full coroner's concerns
During the course of the course of the inquest reference was made to the International Best Practice Guidelines BPG1 Transportation of People Seated in Wheelchairs.
Throughout that document there is clear reference to the risk of persons submarining because of the risk of failure of the cushion and/or an inadequately fitted vehicle seat belt restraint.
Concern One Section 4.5 deals with the seat cushion, and 4.5.1 – cushion attachment. From a seating function perspective, the stability of a cushion is a fundamental requirement. Therefore, the means of attachment of the cushion to the wheelchair support surface needs to be capable of repeated fitting and removal without impairment or deterioration. Cushions may need to be frequently removed for cleaning and maintenance, and an individual user may have a number of cushions for short or long term use. This cushion’s attachment failed after just 9 months of use. The above said Guidelines state that Velcro is strong in shear but less so in tension. Also that the adhesive must have sufficient shear strength. It seems that repeated removal of the cushion for cleaning and maintenance risks exceeding and weakening the relative strengths of the Velcro system itself and the adhesive used to secure the Velcro strip to the wheelchair base. In the circumstances my concern is that there may be more robust and more reliable methods of securing the seat cushion to the wheelchair base, that would negate the risk of detachment, as occurred in this case.
Concern Two Section 5 of the above said Guidelines sets out in some detail the importance of ensuring the adequacy of the fit of the vehicle restraint system to the individual wheelchair and wheelchair user. It was surprising therefore to learn at the inquest that upon collecting the adapted vehicle STs husband was only given a demonstration of how to secure the wheelchair to the vehicle. That there was no assessment of any need to make adjustments to the vehicle occupant restraints to ensure an adequate fit by assessing ST’s position and safety in the vehicle, using her current wheelchair, and to advise a reassessment should the wheelchair be changed. As a consequence, the vehicle occupant seat belt did not fit properly across ST’s lap, contributing to her being thrown into the footwell.
Throughout that document there is clear reference to the risk of persons submarining because of the risk of failure of the cushion and/or an inadequately fitted vehicle seat belt restraint.
Concern One Section 4.5 deals with the seat cushion, and 4.5.1 – cushion attachment. From a seating function perspective, the stability of a cushion is a fundamental requirement. Therefore, the means of attachment of the cushion to the wheelchair support surface needs to be capable of repeated fitting and removal without impairment or deterioration. Cushions may need to be frequently removed for cleaning and maintenance, and an individual user may have a number of cushions for short or long term use. This cushion’s attachment failed after just 9 months of use. The above said Guidelines state that Velcro is strong in shear but less so in tension. Also that the adhesive must have sufficient shear strength. It seems that repeated removal of the cushion for cleaning and maintenance risks exceeding and weakening the relative strengths of the Velcro system itself and the adhesive used to secure the Velcro strip to the wheelchair base. In the circumstances my concern is that there may be more robust and more reliable methods of securing the seat cushion to the wheelchair base, that would negate the risk of detachment, as occurred in this case.
Concern Two Section 5 of the above said Guidelines sets out in some detail the importance of ensuring the adequacy of the fit of the vehicle restraint system to the individual wheelchair and wheelchair user. It was surprising therefore to learn at the inquest that upon collecting the adapted vehicle STs husband was only given a demonstration of how to secure the wheelchair to the vehicle. That there was no assessment of any need to make adjustments to the vehicle occupant restraints to ensure an adequate fit by assessing ST’s position and safety in the vehicle, using her current wheelchair, and to advise a reassessment should the wheelchair be changed. As a consequence, the vehicle occupant seat belt did not fit properly across ST’s lap, contributing to her being thrown into the footwell.
Sent To
Response Status
Linked responses
0 of 3
56-Day Deadline
9 Jun 2026
About PFD responses
Organisations named in PFD reports must respond within 56 days explaining what actions they are taking.
Source: Courts and Tribunals Judiciary
Report Sections
Investigation and Inquest
On 17.10.25 an inquest was opened into the death of Susan Toft who died at Stepping Hill Hospital on 28.09.25, aged 77 years. The inquest concluded on 27.03.26.
Medical Cause of Death
1a) Myocardial Infarction and Pneumonia (joint causes) 1b) Sepsis of unknown aetiology 1c) Fractures to right femur, tibia and fibula II) Myasthenia Gravis
The conclusion was: Accidental Death
Medical Cause of Death
1a) Myocardial Infarction and Pneumonia (joint causes) 1b) Sepsis of unknown aetiology 1c) Fractures to right femur, tibia and fibula II) Myasthenia Gravis
The conclusion was: Accidental Death
Circumstances of the Death
In May 2024 ST suffered a traumatic spinal injury rendering her paraplegic. ST was discharged from hospital in November 2024. In December 2024 ST purchased a converted vehicle to allow rear ramp access for a wheelchair, to be anchored in place of the front passenger seat. On collecting the vehicle ST’s husband was shown how to secure a ‘demonstration wheelchair’ to the floor of the vehicle. ST’s wheelchair was not used to demonstrate, nor was ST asked to sit in the wheelchair being used for the demonstration purposes. In January/February 2025 ST was provided with A Sunrise Q300 wheelchair, later replaced in May 2025 with an Invacare TDX SP2. The Vicair cushion provided with the Sunrise wheelchair was transferred to the Invacare wheelchair. The cushion attached to both wheelchair seat bases with Velcro strips.
On 24 September 2025 ST was a front seat passenger, in her wheelchair fixed to the floor of her adapted vehicle, being driven by her husband, which was forced to brake suddenly and sharply. As the car braked ST slipped from her wheelchair into the passenger footwell resulting in fractures of her right leg, being taken to hospital the next day. That ST did not remain restrained in her wheelchair, and submarined beneath the vehicle seat belt (lap section) was as a result of,
1. the seat cushion (held by Velcro) becoming detached from the wheelchair base. The adhesive to the wheelchair failed on one side. It is not clear what happened to the other side, but it was later noted that the Velcro strip attached to the wheelchair base was missing.
2. The fact that the lap part of the vehicle seat belt did not fit properly across ST’s lap as the seat belt buckle was higher than her lap.
On 24 September 2025 ST was a front seat passenger, in her wheelchair fixed to the floor of her adapted vehicle, being driven by her husband, which was forced to brake suddenly and sharply. As the car braked ST slipped from her wheelchair into the passenger footwell resulting in fractures of her right leg, being taken to hospital the next day. That ST did not remain restrained in her wheelchair, and submarined beneath the vehicle seat belt (lap section) was as a result of,
1. the seat cushion (held by Velcro) becoming detached from the wheelchair base. The adhesive to the wheelchair failed on one side. It is not clear what happened to the other side, but it was later noted that the Velcro strip attached to the wheelchair base was missing.
2. The fact that the lap part of the vehicle seat belt did not fit properly across ST’s lap as the seat belt buckle was higher than her lap.
Action Should Be Taken
In my opinion action should be taken to prevent the risk of future deaths and I believe you have the power to take such action. I have raised this matter with you collectively and as individual organisations.
Similar PFD Reports
Reports sharing organisations, categories, or themes
Related Inquiry Recommendations
Public inquiry recommendations addressing similar themes
Allow Advisory Board to monitor individual compensation cases
Post Office Horizon Inquiry
Weak Government Accountability & Scrutiny
Publish Advisory Board meeting reports within 21 days
Post Office Horizon Inquiry
Weak Government Accountability & Scrutiny
Make monitoring full and fair compensation a core Board duty
Post Office Horizon Inquiry
Weak Government Accountability & Scrutiny
Increase Advisory Board membership if needed for capacity
Post Office Horizon Inquiry
Weak Government Accountability & Scrutiny
Seek court directions for GLO compensation in bankruptcy cases
Post Office Horizon Inquiry
Weak Government Accountability & Scrutiny
Publish proposals for equal tax treatment of compensation payments
Post Office Horizon Inquiry
Weak Government Accountability & Scrutiny
Amend Limitation Act to extend GLO deadline if needed
Post Office Horizon Inquiry
Weak Government Accountability & Scrutiny
Set agreed closing date for Horizon Shortfall Scheme applications
Post Office Horizon Inquiry
Weak Government Accountability & Scrutiny
Respond to recommendations by 10 October 2025
Post Office Horizon Inquiry
Weak Government Accountability & Scrutiny
Establish standing public body to administer future redress schemes
Post Office Horizon Inquiry
Weak Government Accountability & Scrutiny
Data sourced from Courts and Tribunals Judiciary under the Open Government Licence.